Interface: USB 2.0 (complies with the USB 2.0 specification) — data transfer rate up to ~480 Mbps.

Connectors:

• One end — USB Type A Male (standard USB-A plug)

• Other end — Mini-USB 5-pin Male (Mini-USB Type B with 5 contacts)

Cable length: ~3 m (as specified in your request)

Materials and construction (typical):

• Conductors: copper wires

• Shielding: foil + braided layer (to reduce interference)

• Contacts: possibly gold-plated or nickel-plated for better conductivity and corrosion resistance

• Color: usually black or another neutral color (depends on manufacturer)

• Backward compatibility with USB 1.1/1.0 — works with older USB devices.

Additional parameters (typical):

• Data transfer speed: up to 480 Mbps (High Speed USB 2.0)

• Cable jacket material: PVC or similar outer coating

• Outer cable diameter: ~4 mm (may vary)

• Operating temperature: typically from 0 °C to ~50 °C (depends on design)

• Wire gauge/resistance: for example, AWG 28 for data lines + AWG 24 for power lines in some models

Application:
This cable is suitable for connecting devices with a Mini-USB 5-pin connector (e.g., digital cameras, external hard drives, older MP3 players, card readers) to a standard USB Type A port on a computer or other USB host device.

What to check when buying from S-TEK:

• Make sure the cable length is indeed 3 m, as it may vary between models.

• Confirm that the connector is Mini-USB 5-pin Male, not Micro-USB or another type.

• Check contact quality (gold-plated/nickel-plated) and shielding — these affect signal stability over long distances.

• Clarify the manufacturer’s warranty terms.

• If the cable is used for both power and data (e.g., an external hard drive), ensure it supports sufficient current and minimal voltage drop.