My cart

0 item(s) - 0.00TMT

  • Your shopping cart is empty!

BACK UPS LIGHTWAVE 850VA
BACK UPS LIGHTWAVE 850VA
BACK UPS LIGHTWAVE 850VA

BACK UPS LIGHTWAVE 850VA

725.00TMT
Brand:
Product Code: BACK UPS LIGHTWAVE 850VA
Stock In Stock

Product Description

Parameter Value / Description
Model Lightwave 850VA (LW‑UPS‑850 or similar)
Capacity (Apparent Power) 850 VA
Output Power (Real / Active) ~ 480 W (примерно)
Topology Line‑interactive (with AVR) / or Offline with AVR
Input Voltage Range ~ 140 VAC – 300 VAC (или ± 25 % от номинала)
Nominal Input Voltage 230 VAC
Output Voltage (on battery) 230 VAC ±10 %
Transfer Time 2‑6 ms (typical)
Waveform on Battery Simulated sine wave (or stepped approximation)
Battery Type Sealed Lead Acid (SLA), internal, replaceable
Battery Specification 12 V, 7 Ah (типичный)
Recharge Time ≈ 4‑8 hours to ~90 %
Typical Backup Time 10‑20 minutes (depending on load)
Output Sockets / Outlets 1 (or few) AC outlets (3‑pin)
Indicators & Alarms LED indicators (mains, battery, overload), audible alarm
Protections Overload, overcharge, surge protection, short circuit protection
Cold Start Capability Yes (can power on from battery)
Dimensions ~ 30 cm × 12 cm × 16 cm (примерные)
Weight ~ 5‑6 kg (примерно)
Operating Temperature 0 °C to +40 °C
Storage Temperature –15 °C to +45 °C
Humidity (Operating) 0 % to 90 % (non‑condensing)
Warranty Depends on manufacturer (обычно 12 месяцев или больше)

Notes / Remarks:

  • In many listings, Lightwave 850VA is described as “line‑interactive” with AVR, which means the device can adjust input voltage (boost or buck) without switching to battery, improving stability and battery life.

  • Because of the “simulated sine wave” output on battery, it may not be suitable for highly sensitive or heavy loads (e.g. high-end servers, very sensitive electronics).

  • The backup time is heavily dependent on the current load — the less power you draw, the longer the UPS can keep devices running.

BACK UPS LIGHTWAVE 850VA

BACK UPS LIGHTWAVE 850VA

725.00TMT
Back to top